Find out what products you can use yourself at home to remove traces of fuel oil and save your favorite thing. Fuel oil stains that suddenly appear can bring a lot of unpleasant moments. Every hostess knows how hard it is to remove black spots, but you shouldn't rush to take things to the dry cleaner and pay large sums for the services of professionals. Everything can be done independently at home using simple and affordable means.
How to wash fuel oil from clothes - useful tips
It is important to remember that it will be possible to remove stubborn stains from fuel oil only if you strictly adhere to a few simple rules:
- A simple wash will not get rid of the fuel oil stain, so you need to use special solutions and preparations available at home.
- The most important rule is that the treatment should be carried out immediately after the stain has appeared on the clothes. It is much easier to remove fresh oil stains than old ones.
- A specific cleaning agent is selected depending on the type of fabric. It is imperative to determine whether it is possible to use a solution for processing fabric so as not to completely ruin the thing.
- Even if you are 100% sure that the cleaning agent can be used for a certain type of fabric, you should first make a small test on an inconspicuous area of the product. Such an experiment will help to understand whether the item will spoil the tool or not.
- Next, you need to establish how deeply the fuel oil has penetrated into the tissue. It is from this factor that it depends on how the cleaning agent will be applied.
- To treat an old stain that has literally spread over the fabric, you need to completely place the place of contamination in a cleaning solution.
- In the event that the stain is not large, the agent is applied exclusively to the lubricant.
- Quite often, after cleaning is completed, a rim from the stain remains on the fabric. This can be easily avoided if you treat not only the place of contamination, but also a slightly clean cloth.
- When applying the cleaning agent, the movements should be directed from the edge of the spot towards the center. This prevents the oil from spreading over the surface of the fabric.
- During cleaning, the clean part of the product may get dirty, which is why you need to put a cloth on the back side.
- It is much more effective to remove the oil stain from the back of the product. Therefore, before cleaning, you need to turn the item inside out and place a paper towel on the stain.
- After cleaning, regardless of what kind of product was used, the product must be rinsed in warm water. At the end, the item is washed by hand and only then can the washing machine be used.
- When washing, you need to use not only powder, but also any stain remover, as well as a conditioner that will help soften the fabric.
- If aggressive agents are used to remove fuel oil, it is imperative to work with gloves to protect the delicate skin of the hands. It is only necessary to handle contamination away from fire and various heating elements, especially when gasoline is used for cleaning.
- To remove fuel oil from delicate fabrics, it is not recommended to rub the material strongly during processing. Do not use very hot water during soaking.
- If the cleaning procedure carried out does not give a positive result, you need to use another method, but only after the thing is completely dry. The product is thoroughly rinsed in clean water to prevent one cleaning solution from reacting with another.
- In the case of using chemicals, first of all, it concerns special stain removers, gloves and a protective mask must be used. Care must be taken not to get the solution on the skin or eyes.
- Drying should only be done outdoors, so that cleaning agent residues and the unpleasant smell of fuel oil will disappear. It is strictly forbidden to use modern dryers or hang things on heating devices.
How to remove a fresh oil stain from clothes?
After a stain from fuel oil is noticed on the clothes, you need to immediately take measures to remove it:
- The place of contamination should be blotted with a napkin. It is advisable to use highly absorbent paper. You should try to absorb the grease from the fabric into the paper as much as possible.
- Further residues of fuel oil, which have managed to be absorbed into the material, are removed. For this, a simple baby powder is used. A large amount of the product is applied to the stain. Alternatively, you can use finely ground salt (finely ground only) or cornstarch.
- In order for the powder to penetrate as much as possible into the fabric, you need to rub the stain a little with a napkin. However, the movements must be careful not to accidentally smudge the fuel oil further.
- A dishwashing detergent is applied to the powder, which also treats the reverse side of the stain.
- First, rub the place of contamination with your fingers, after the appearance of foam, a soft brush is used.
- The remaining cleaning agent is washed off with warm water until the stain is completely dry. The thing is sent to the washing machine. The washing mode is selected depending on the type of fabric.
- After completing the wash, the product must be dried naturally. In the event that a tumble dryer is used, under the condition of an unsuccessful wash, the oil stain will only be absorbed into the fabric more strongly and it will be almost impossible to remove it.
Removing fuel oil stains with laundry soap
- If the oil stain is small, you can use simple laundry soap to remove it.
- The soap is crushed on a grater and poured with a small amount of hot water. You need to wait a little until the soap shavings dissolve.
- The soap solution can be replaced with a simple shower gel, which also effectively removes grease stains.
- The stain is moistened with the mixture, but the solution must be applied strictly to the dry material.
- Rubbing the dirt with your hands until the soap is completely absorbed.
- Then a small amount of cleaning solution is added and the dirt is rubbed with a brush.
- Soap residues are washed off.
- Separately, table vinegar is diluted with water in a ratio of 1: 2. The composition is applied to a wet soapy spot. Vinegar has the ability to dissolve alkali, so the soap solution rinses off the fabric much faster.
Do not use soap and vinegar at the same time. Apply vinegar after you finish treating the stain with soap. The fact is that acetic acid has the ability to reduce the effectiveness of the detergent, which is why the stain simply cannot be washed.
After completing the cleaning procedure, the product must be washed with powder. If dirt remains, it is necessary to carry out another cleaning using laundry soap.
Removing fuel oil stains with diesel fuel or turpentine
When working with any fuel, safety precautions must be followed without fail. To remove fuel oil, it is necessary to use solutions only in a purified form. They have the same properties as a simple product, but there is almost no unpleasant odor and fatty base.
It is strictly forbidden to use turpentine or diesel fuel for cleaning clothes made of silk or synthetic material.
The cleaning procedure is carried out as follows:
- To remove fresh and small stains, apply the solution with a cotton pad. It is important to squeeze it well.A cotton pad is placed on the place of contamination for 1, 5 hours.
- In case of severe contamination, you first need to wet the fabric, after which diesel fuel or turpentine is applied to the stain. The solution is left for 60 minutes.
- After the specified time, the fuel oil becomes soft, so it can be removed with a soft cloth.
- Then the thing must be completely washed.
- In some cases, after washing, an ugly stain of turpentine or diesel fuel may still remain. Therefore, the product must be additionally soaked in water with the addition of a stain remover, and then washed again.
Using heat to remove oil stains
For this purpose, it is recommended to use a hair dryer or iron:
- You will need to prepare a lot of napkins in advance.
- Clothes are laid out on an ironing board.
- Place paper underneath and on top of the stain.
- The iron heats up to a medium temperature.
- Several times you need to run the iron over the napkins, which are periodically changed, since fuel oil will be absorbed into them.
- The procedure is carried out until the stain is completely removed.
- Traces of grease may remain on the fabric, which can be removed with any detergent.
- At the end, you need to wash the item with powder.
The use of starch, white clay, ammonia
- In the container, a cleaning mixture is prepared from ammonia, any kind of starch and white cosmetic clay.
- The resulting composition should resemble thick rustic sour cream in consistency.
- All components are taken in equal amounts.
- The finished cleaning compound is applied to the stain.
- The ammonia dissolves the lubricant, after which the starch absorbs it, and the clay conducts a gentle and gentle cleaning of the material.
- The gruel is left on the fabric until it is absorbed.
- Gently removes the remaining cleaning agent with your hands, and the stain is wiped off with a foam sponge.
- At the end, the product must be washed using powder.
- If, after drying, traces of fuel oil remain on the fabric, a second cleaning procedure is carried out.
The use of turpentine and soda
- The combination of turpentine with soda in most cases allows you to remove the stain of fuel oil.
- First, things need to be processed dry - a small depression is made at the place of contamination.
- The turpentine is slightly warmed up and applied to the lubricant, left for 15 minutes.
- Soda is poured on top, and the stain is rubbed with a brush.
- At the end, the garment is washed by hand and only then can you use a machine wash.
Use of acetone
- Acetone is a versatile solvent that can be used alone at home.
- It is not recommended to use acetone for processing silk and synthetic fabrics, as it can discolor the material or corrode it.
- Thinner should only be used in small amounts, so do not pour it directly onto the stain.
- A cotton pad is moistened in acetone and applied directly to the lubricant.
- After 15 minutes, the fuel oil will dissolve, and its residues are removed with a napkin.
- At the end, the product is washed using powder.
How to wash fuel oil from leather clothing at home?
- On natural leather, the oil stain does not penetrate into the deep layers, so it can be easily dissolved. A simple hairspray is an excellent cleaning agent.
- The product is sprayed onto the stain and left on for about 10 minutes.
- It is necessary to ensure that the varnish does not completely dry out, otherwise it will have to be removed.
- The residues of fuel oil are removed with clean napkins.
- Finally, the leather is rubbed with any soft material.
How to remove fuel oil from silk clothes?
- Silk is a very delicate fabric that needs careful maintenance, so the use of aggressive cleaning agents is contraindicated.
- To remove a stain from fuel oil, water (warm) is mixed with ammonia in equal amounts.
- Glycerin is added to the solution, due to which its effect softens - by 4 tbsp. l. funds are taken 1 tbsp. l. glycerin.
- The resulting composition is applied to the lubricant and left for 30 minutes.
- Then the cloth is washed with clean and warm water.
- Re-cleaning if necessary.
- At the end, the product is washed using powder.
How to remove the smell of fuel oil from clothes?
- Regardless of what product or powder is used for cleaning clothes, an unpleasant smell of fuel oil may remain on the fabric.
- In most cases, it is sufficient to dry the item in the open air.
- Aromatic oil will help remove the unpleasant smell of grease. Any product can be used, but the most effective are pine and eucalyptus oils.
- Take two clean cotton pads, on which essential oil is applied, taking into account the size of the spot.
- The fabric is placed between cotton pads and left for about 60 minutes.
- Essential oils can leave a stain that can be removed with a simple wash.
To completely remove fuel oil stain from the fabric yourself at home, it is necessary not only to choose an effective remedy, but also to use it correctly, taking into account the type of fabric.