How to create a paper kusudama ball

Table of contents:

How to create a paper kusudama ball
How to create a paper kusudama ball
Anonim

You can make a magic ball of kusudama from paper or from a banknote. A master class and 80 step-by-step photos representing each stage of the work will help you with this. Kusudama is one of the constituent parts of origami. And before, such balls were mainly used for medicinal purposes. Crushed medicinal plants were poured into them and hung in the patient's house. Today, such balls are more often used as decorations.

Paper kusudama ball: how to make a beginner

Purple paper ball kusudama
Purple paper ball kusudama

Watch a beginner's workshop to help you master the basics of this fun Japanese art. Here's what you need:

  • paper;
  • scissors;
  • glue.

Cut off the excess from the paper to make a square. You can take small sheets of paper from a notepad. Fold the sheet diagonally in half, then pull the two lower corners to the top to get this detail.

Pulling the corners of the workpiece to the top
Pulling the corners of the workpiece to the top

Now the bent corners need to be bent as follows: right to right, and left to left.

Correct pulling back of bent corners
Correct pulling back of bent corners

Further, the resulting two folds need to be straightened.

Straightening the folds of the workpiece
Straightening the folds of the workpiece

Expand the workpiece so that the back side is now facing you and turn the newly created side triangles outward.

Turning triangles outward
Turning triangles outward

Here's how we continue to create a kusudama ball out of paper: turn the blank over again with the right side facing you and bend the corners, focusing on the already existing lines.

Bending corners along existing lines
Bending corners along existing lines

Now you need to make a cone from this square part. To do this, apply a little glue to one bent triangle and connect it to the other - on the opposite side.

Applying glue to the corner and folding the workpiece
Applying glue to the corner and folding the workpiece

Make several identical details. The more there are, the more magnificent the ball will turn out. In this case, there are 5 of them.

Five blanks-cones
Five blanks-cones

It is necessary to connect these blanks in order to give these petals the shape of a flower. To do this, grease their side edges with glue and connect them together.

Connecting cones into one flower
Connecting cones into one flower

Use paper clips to hold the tabs in place to keep the workpieces dry in the correct position. When the glue is dry, they will need to be removed.

A finished flower from conical blanks
A finished flower from conical blanks

For the kusudama ball, the master class on the creation of which you are looking at, you will need 12 such flowers. When you glue them together, you will get a beautiful product, for example, like this.

Ready-made kusudama ball of flowers
Ready-made kusudama ball of flowers

When making kusudama balls, it is better not to use superglue or rubber, as the product may be damaged by traces of these solutions. Better to take PVA. Watch the next workshop to craft a kusudama ball.

Pink ball of kusudama
Pink ball of kusudama

Thus, the product will turn out as a result. Before you start creating, take:

  • rectangular paper blanks of 1 and 2 colors, 30 pieces each, measuring 5 by 10 cm;
  • glue;
  • artificial pearls.

Such a kusudama for beginners should not cause them any difficulty, since creating a ball is easy to figure out. When finished, it will have a diameter of 15 cm.

Take the first paper triangle and fold it in half. Direct the corners of this workpiece to the center.

Direction of workpiece corners to the center
Direction of workpiece corners to the center

These manipulations are needed in order to mark the line on the blank. Expand it and you will see them.

Formed lines on a paper blank
Formed lines on a paper blank

Fold the rectangle in half again, but this time along its long side.

Fold a paper rectangle in half lengthwise
Fold a paper rectangle in half lengthwise

Expand the workpiece again, its right and left small sides will be pulled to the center. After that, the rectangle must again be brought to its original position, but the following lines will clearly appear on it.

New lines on the blank
New lines on the blank

They are needed so that now, focusing on these bends, you can fold this workpiece along the lines. Here is its view from the front and from the wrong side.

The result of the correct folding of the workpiece along the lines
The result of the correct folding of the workpiece along the lines

And this is how this element looks from above.

What the workpiece looks like from above
What the workpiece looks like from above

In the same way, you need to arrange a rectangle of a different color. Expand it, and place the workpiece you made earlier in the center.

Placing a pink blank on a rectangle of a different color
Placing a pink blank on a rectangle of a different color

Bend the corners of the second piece diagonally and in a checkerboard pattern pass them through the corners of the first piece.

Bending the corners of the second part diagonally
Bending the corners of the second part diagonally

You need to work a little more with these two elements so that you get a detail like in the next photo.

What a part looks like from two paper blanks
What a part looks like from two paper blanks

Now you need to assemble a kusudama ball from these modules. Let's take 3 blanks. The first has a kind of pocket. This is where you put the corner of the second piece.

The beginning of the assembly of the kusudama ball
The beginning of the assembly of the kusudama ball

Next, pass the corner of the third into the corner of the second. You should have a pyramid like this.

The process of joining yellow-pink parts
The process of joining yellow-pink parts

This is how kusudama is created. Following the diagram presented, you need to continue to stack the modules.

Further assembly of the kusudama ball from paper parts
Further assembly of the kusudama ball from paper parts

You will connect four blanks, and where to put the fifth, an arrow and a small blue triangle on the right show.

Place for insertion of the 5th workpiece
Place for insertion of the 5th workpiece

Now each pair of petals needs to be combined to create a pyramid.

The result of bonding five pieces
The result of bonding five pieces

Give the petals the desired shape by fixing them with glue. Also, the bonding mass will help fix the pearls.

The pearl in the center of the flower
The pearl in the center of the flower

Prepare several of these modules, after which the kusudama ball can be hung to decorate the room.

Two balls of kusudama on a white background
Two balls of kusudama on a white background

Kusudama - the flower of money

Such a present is a great gift for a birthday or any other holiday. If you want to give money in an original way, then you can make a flower out of it. Depending on how much you have, this will be the size of the bills.

If you just need to bring an inexpensive present, then purchase bills that resemble cash. These can be cut if you want to decorate your paper flower. To make a kusudama ball out of money, take:

  • real or souvenir bills;
  • scissors.

Bend the ends of the money down, as shown in the next photo.

Folding the corners of a banknote
Folding the corners of a banknote

If this is souvenir money, then cut off two of these corners, removing the middle.

The result of cutting off the middle of a souvenir bill
The result of cutting off the middle of a souvenir bill

If the bill is real, then you need to bend the corner inward to get a square. Bend it in half diagonally to make a triangle. Then we proceed in this way. We bend the corners of the workpiece up. Here's what you get.

Bending the corners of the workpiece up
Bending the corners of the workpiece up

Next, pull the right corner to the right, left to the left. Lock in this position.

Correct tightening of corners
Correct tightening of corners

Fold the small protruding corners 1 and 2 inward.

Bending inward protruding small corners
Bending inward protruding small corners

If the bill is a gift, spread glue on a small sidewall, bend the opposite side to it and make such a bun. If the money is real, then you can fix the workpiece in this position with a transparent paper clip.

Folding the workpiece into a tube
Folding the workpiece into a tube

You will need 5 similar modules, which need to be connected to each other with glue or paper clips.

Making a flower from banknotes
Making a flower from banknotes

You will get such a beautiful flower from a bill. If the money is gift, then you still have trim strips, fold each in the form of an accordion and decorate your work.

Folding an accordion from the remains of souvenir bills
Folding an accordion from the remains of souvenir bills

Did you like the presented Japanese technique? Try making the following origami craft using this skill.

How to make a paper ball with your own hands - a master class

The diameter of the finished product is 12 cm. It consists of 12 flowers, and each such blank is made of 4 modules.

Kusudama ball of 12 flowers
Kusudama ball of 12 flowers

Cut a 10 cm square from a piece of paper and fold it diagonally. Then again, on the second diagonal.

Folding a square workpiece
Folding a square workpiece

Flip the square over and fold it in half to create another strip. Then fold it in half so that this line is in relation to the first at an angle of 90 degrees.

The reverse side of the paper square
The reverse side of the paper square

Using these markings, make a double square, pulling the fold toward the center.

Creating a double square
Creating a double square

Align the top corner with the bottom and make a fold.

Alignment of the upper corner of the workpiece with the lower
Alignment of the upper corner of the workpiece with the lower

The dotted line in the next step-by-step photo shows how to fold the two inner corners to the centerline.

Bend inside corners to centerline
Bend inside corners to centerline

Then each corner must be opened and turned inward.

Opening the corners of the workpiece
Opening the corners of the workpiece

You have double corners, you need to lower them down, and then fold the part vertically in half.

Folding the part in half vertically
Folding the part in half vertically

Focusing on the next dotted line, pull the top corner towards the middle, and then open it and hide it inside the fold.

Bending the corner inside the fold
Bending the corner inside the fold

At the top, you have two triangles. Now you need to pull one bottom and one top corner to the middle.

Pulling to the middle of the top and bottom corners
Pulling to the middle of the top and bottom corners

The two lower ones must be lifted up and folded down to the middle. Now do the same manipulations on the back of the module.

Folding corners to the center down
Folding corners to the center down

So you should get a workpiece in assembled and straightened form.

Straightened paper blank
Straightened paper blank

Make three more of these modules and glue them together, dripping glue onto the bottom fragment of each part.

Connecting the resulting paper modules
Connecting the resulting paper modules

You need to make 12 such flowers and glue them together.

Assembling a kusudama ball from paper modules
Assembling a kusudama ball from paper modules

Cover the center of each flower with a bead, after which a paper kusudama ball can be given or decorated with. If some steps of the master class caused you difficulty, then watch the video explanation in the next master class.

The second video tutorial clearly shows how a kusudama ball is made from spirals.

Recommended: