Learn how to sew a headdress: make a warrior, a lady's hat out of threads, decorate a headdress, sew a headscarf, a Panama hat, a Tatar skullcap, a Muslim headscarf, a hood-snood, a headscarf for a church.
All kinds of hats do not exist! You can create a flirty thread hat, beret, cap, or make an antique warrior. This is useful not only for costumed performances, but also becomes a convenient thing at home, in nature. For you - and other national headdresses.
How to sew a warrior with your own hands?
First, reshoot the pattern. As you can see, it consists of three parts, these are:
- bottom;
- eyelet;
- strings.
You will also need to make a lining. Patterns of the main parts are suitable for her. Cut out the blanks of the future warrior from the colored fabric, and the details for this part of the product from the lining. Here's how to sew the hat next, fold the bottom and lining details on the same part right sides to each other. In order to then turn out the product better, you need to make notches, as in the photo. Sew where the dotted line marks the seam.
Turn the garment over your face, iron the seam, sew this part of the povoynik along the edge with a large stitch to then tighten the thread. There will be fewer gathers on the forehead, more on the temporal part.
Here's how to sew the headdress next, take the details of the headdress and the ties. Sew them together. This applies to the lining and the main fabric. Then lay these two canvases one on top of the other, sew on one side, where the stitching is applied with the dotted line.
Then iron the seam and connect the two pieces and iron again. Fold the blank in half to find the middle. This is necessary in order to combine the centers of the bottom on the seamy side and this detail. Sew a seam in the middle to one side, then to the other side, attaching the belt loops of the strings. Sew on a typewriter and turn out. Then iron it.
Now sew on the face. Do not forget to sketch in advance.
Iron the strings, join the edges and sew on a typewriter. Now you can try on a hat, knowing how to make a warrior with your own hands. Now check out how to create an adorable hat. A very interesting way is used for this. After all, ordinary sewing threads will help to create it.
How to make a hat with your own hands?
To make such a hat, take:
- bobbin threads;
- balloon;
- gelatin;
- suitable capacity;
- centimeter;
- veil or tulle.
First, pour 150 g of cold water into a glass. Now put three teaspoons of gelatin in here. Leave to swell for half an hour. Inflate the balloon. In this way, increase its volume to such an extent that it repeats the volume of the head, for whom you decided to make a hat. This is usually 51 to 53 cm. Heat the gelatin to a near boil. Put the container with it on a small burner, lower the threads here. Start winding them around the ball. In this case, with one hand, you will still remove excess gelatin from these threads.
Now you will need to be patient and leave the workpiece to dry until the end.
You can speed up the drying process by using a hair dryer.
When the threads are completely dry on the ball, then pierce it with a needle, remove it from there. Then the workpiece must be cut into two pieces. In this case, it will remain at the bottom third of the total volume, and at the top 2/3. For the cap itself, you will need a large part.
To make a hat in this way, sew the edges of the future hat with a satin ribbon of the same color on your hands.
Then you need to shape this hat. To do this, press the upper part into this thing and form the sides, while on the one side they will be 7 cm, and on the other 30 cm. Where the margins are larger, this is the back part.
Now you need to decorate your creation. To do this, take a piece of tulle, attach it. Fix the satin flower immediately.
You can make a headdress not only in white, but also in any other. Lovers of pink will surely like this hat.
How to sew a hat - decorate a hat with your own hands
This is especially true on the eve of the beach season. After all, you can decorate an existing headdress.
Using a glue gun, attach a tape made of sequins, beads or other material closer to the edges of the cap. In this case, you can create any patterns or, for example, write in this way the name of its owner.
Take a satin ribbon, fold it in half, and start spiraling. Then glue the turns and the tip of such a rose on the back. Spread it out and glue it to the hat.
You can make a brooch out of fabric and sew or attach it to such a feminine headdress.
Feathers, tulle, flowers from ribbons look spectacular. These are the materials you can use to decorate your hat. You can also take ribbons in two contrasting colors and braid them to create a checkerboard pattern.
You can make a flower from fabric, attach a knitted mesh to it and sew artificial berries to it.
If you have an ordinary straw hat, you want to flaunt it at the dacha so that the neighbors envy, then we suggest decorating it. Take a piece of beige fabric, cut a ribbon out of it, gather it up, and then sew this ruffle around the top of the brim. You will decorate the fields themselves with sewing. You can also use other textile materials to decorate the hat.
If you want to not only look great, but also smell of natural aromas, then cut the red and yellow orange into slices and dry them. You can also use the heads of small sunflowers. Let them dry and then use a hot gun to plant on the hem of the hat. In this way, attach the dried fruit.
If you need to quickly decorate the hat, then take an existing silk scarf, tie it around the headdress at the junction of the upper part with the brim. Create a flirty bow out of the scarf.
You can also use felt. The combination of pink and lilac looks especially beautiful. Cut flowers out of these materials. Then combine them to use several shades in one plant. Glue these beautiful elements to the side of the hat, tie it with a matching satin ribbon.
If you have scissors with zigzag blades, then you can make the hat decorations in 5 minutes. To do this, cut a strip of fabric with them, and then just glue it on the hat in a circle.
If you have a white straw hat, then draw patterns, flowers or something else here. You can attach a strip of colored fabric to the brim to decorate your white straw hat this way.
Don't forget your husband. After all, men also have summer hats made of such materials. Decorate a boring hat with a ribbon to please your soul mate.
Take yarn and a thick-eye needle and embroider a calm pattern on the man's hat to transform it.
How to sew a scarf for the summer?
This headpiece is simply unique. Since you don't have to tie and untie it. And such a scarf will be very useful for a small child for the summer.
See how you need to cut it out. The following photo shows several parts with dimensions.
Cut out parts with seam allowances. Take two rectangles 14 cm high. Stitch them together along the long edge. Turn out the bottom of the scarf, sew. Also process the top. Now bend the edges back, sew in here a part sewn from two long rectangles, the edges of which must first be connected. Then you will need to insert an elastic band into this part and fix it.
You will make another summer headdress with the help of the next master class.
How to sew a fashionable Panama - a master class and a photo
As you can see, it consists of:
- crown;
- bottom;
- fields.
For a hat, you can use an old denim, combine it with a fabric of a suitable color and white stitching. Use a patchwork technique. Take shreds of denim and sew them onto the matching fabric. Now place the part patterns on this new fabric. Cut them out with seam allowances. You will also need to make a lining. That is, it turns out that you need to create two panamas, one of which will be the front side, and the other the wrong side. Based on the patterns, create these two things. Then nest one inside the other and sew along the edges of the field to connect these parts. If you wish, sew on the flowers from the braid, thus decorating this outfit.
It is no less interesting to create national headdresses. See how to make one of them.
Read on: How to create a hat from a newspaper and a hat from scrap materials with your own hands
How to sew a Muslim headdress with your own hands?
It will completely cover your hair and will correspond to national traditions. To do it, take:
- 20 cm dark jersey;
- threads of the same color;
- 10 cm of linen elastic.
First, place 20 cm of jersey in front of you. Then fold this strip in half and cut out one side as shown in the photo. The dimensions of the received part are also given here. You will also need to cut a circle with a diameter of 14 cm from this fabric.
Round off the resulting ends of the main part, tuck the future bandages, pin them with pins and sew along the edge.
Then match the circle and the middle of the resulting main part. This procedure is shown in the following photo.
Connect these two pieces with an overlock. Now you need to sew the upper parts of the ties at the back to connect them.
Fold over the edge and sew here. At the back, you need to bend it 3 cm so that you can then insert an elastic band here to a length of 6 cm. You fix its ends by sewing them on.
Now you need to decorate the Muslim headdress in the required style. To do this, take the same fabric and cut a 47 x 20 cm strip from it. Twist the tourniquet. Connect the ends, use a sewing machine for this. Then attach this decor element on your hands to the top of the headdress.
Other national headdresses are presented below. You can sew them for yourself, as a gift or, for example, for a theatrical performance.
How to make a Tatar skullcap - master class and photo
To create such a product, redraw the pattern. As you can see, it consists of a bottom and a rim. The dimensions are already indicated here. But you add 1 cm on all sides so that you have a seam of this size. You will also need to cut out a cotton lining for the headband. Cut it out, as well as the main velvet headband. Connect these two blanks with the right sides, sew them on one long side.
Then sew on the small side. You have a kind of fabric ring. Fold it in half so that the small side seam and the large one remain inside. You have one side not sewn up. Insert the bottom part here and sweep on your hands first. Then sew on a typewriter.
It remains to decorate the Tatar headdress with national ornaments. To do this, you can use the embroidery technique, sew a decorative cord here.
If you need an unusual gift for a person who appreciates Russian folk art, then we suggest creating it for you with your own hands. Also, such a thing is suitable for a holiday, for staging.
How to make a Russian folk headdress?
Earlier, peasants wore such hats, which were created from the simplest scraps. And rich people sported costumes adorned with precious stones and gold. He was called a magpie.
Earlier in Russia, this festive outfit was worn over a cap or scarf. But you could wear it separately. Use silk or velvet for the base. You will decorate the fabric, when it has already turned into a headdress, with embroidery, gold embroidery, beads, decorative braid.
Take the selected fabric, cut a 20 x 54 cm rectangle from it. Bend it in half mentally to determine where the front will be. Sew on decorative tape and other embellishments here if desired.
After that, you need to fold this blank in half and sew along the fold, slightly stepping back from the edge. This is the crown. The second part will be sewn from 70 x 50 cm fabric. Find the middle of this blank and make it more round. Glue decorative elements at the bottom or sew them on. Then you need to sew with a double stitch along the edge to tighten the threads and gather this place.
Place the prepared part in the eyelet, baste here first on your hands, then on a typewriter. Insert strings into the headdress, fold the fabric and sew. Trim the ties in advance with braid.
You can sew another headdress in accordance with national traditions. This is a warrior. But it will not be the same as at the beginning of the article, but more modern.
How to sew a headdress from a scarf?
It is created like a magpie's headdress. Take a scarf measuring 60 x 50 cm. From a similar fabric or matching color, create a long tie measuring 10 x 200 cm. Fold the scarf in half, round the bottom edge, and process it. Sew the strip onto the forehead. Then you can tie it on both sides as shown in the photo.
Shawl hat - step by step master class and photo
Here's another option for how to turn an already unnecessary scarf into a modern thing. For such an idea, not only a whole scarf is suitable, but also its remnants. Therefore, if you suddenly burned this thing, do not throw it away, but create a fashionable hat out of it.
A headdress pattern will certainly help you. Look, you need to determine the girth of the head first. Divide the resulting value in half and set it aside from the middle to the left. And the height of the headdress is 50 cm.
If this is more convenient for you, then just print this pattern. Glue dublerin on the back of the fabric, then straighten the fabric and pin the pattern from the wrong side. Outline it, cut it out. After creating the first part, you will need to make a similar one.
The lining in this case is made of fleece. Create it using the same pattern. But since the hat will be elongated, the fleece lining is about 2 times shorter than the main part. Cut two semicircular pieces out of this soft material, sew them together at the top.
Now press on the seams. After that, insert the backing piece into the main one, aligning their front sides. Pin up here.
Then turn out the product, you need to leave a hole for this in advance. Now you need to sew it up. See how you can put on this original headpiece.
If desired, tie such a ponytail with an elastic band or leave it as it was.
To keep you warm in bad weather, create a comfortable bonnet-style hat. See how to do it.
How to sew a hood?
This is how it will turn out. At first, to make such a headdress, a pattern will be needed. But it is not difficult and is presented in the next photo.
Cut out the details of this pattern, transfer them to the fabric. Cut out one back piece and 2 side pieces.
This pattern is versatile as it fits all head sizes.
Sew all the details into place. Then you need to sew the inner hood according to the same pattern and sew this lining to the main one. All that remains is to create an eyelet, sew on a button, after which you can flaunt this comfortable headdress. And if you want to see how to sew a hood, then turn on the video.
This snood hood is lined with fur, so it will be warm and comfortable in the cool season.
And how to sew a headdress from a scarf, the second video shows.
